|
DCO Drive Solutions from TAG
(.pdf)
● TAG
can REPLACE older or failing Hard (Disk) Drives
& DAT Tape Drives on existing Stromberg Carlson DCO,
MSDA 822010 circuit packs with NEW Solid State
Drives.
NEBS Certified
-
NEW SOLID
STATE DRIVES AVAILABLE FROM TAG |
MSDA
(TAPE) 822010
w/
EXISTING DRIVE |
TAG MODEL # |
USED ON MSDA (TAPE) 822010 CIRCUIT PACK |
|
TSD-DCO-01 |
Solid State Replacement for:
Stromberg Carlson DCO,
MSDA (DISK)
822010-706, 4.5Gb
Hard Drive
HD
Install Guide (.pdf) |
|
TSDT-DCO-01 |
Solid State Replacement for:
Stromberg Carlson DCO,
MSDA (TAPE)
822010-536, 822010-616, 822010-646,
822010-656
DAT Tape Drive
Includes: 4Gb Industrial Compact Flash
Card
(PN # TSD-CF-04)
DAT Drive Install Guide (.pdf)
|
|
|
|
|
|
|
|
DMS/100/10 Current Loop Adapter & Accessories
(.pdf)
●
TAG's Current
Loop Adapter Cable (# 400725SB2) is used to
program and troubleshoot a DMS. The Hardwire
Adapter (# 400725SBW) connects the TX (+/-) and
RX (+/-) current loop wires to a 25 Pin female
connector. It is used with the # 400725SB2 Current
Loop Adapter when the DMS 100/10 System doesn't
have a DEC connector.
|
|
|
|
5ESS FAN
REPLACEMENTS
KS22501L3A
MODELS
#
TF-5ESS-04P (.pdf)
5ESS Replacement Fan
(KS22501L3A)
w/ 5 Leads and Amp Connector |
|
|
Universal Mounting for
NT3X90AA, NT3X90AB,
NT3X90AC
& NT3X90AF
cooling units
- No 24VAC Inverters
- No Sensor Paddles |
*** NEW ***
TAG Universal DMS-100 Fan Tray
# TFT-3X9013T
(.pdf)
TAG
Universal DMS-100 3X9013 Fan Tray
Includes:
(1) Brand
New Fan Tray w/ Universal Mounting Holes, (5)
TF-DMS03, DMS-100 48VDC Fans w/ TTL Tach & 3 Wire
Plug, (1)
Fan Control Board with Built in Sensors (no paddles
needed), Wiring Labels, Mounting Hardware, (1) Wiring Harness w/
Connector, NT3X90AA/AB & NT3X90AF Adapter Cables &
Installation Guide
|
DMS TRAY
INSTALLATION VIDEO
(NT3X90AC) |
|
|
|
DMS TRAY
INSTALLATION VIDEO
(NT3X90AF) |
|
|
|
DMS TRAY
CONVERSION
INSTALLATION VIDEO
(NT3X90AA/AB) |
TFT-3X9013T
Installation Guide (.pdf)
|
|
|
|
|
DMS-100
#
TF-DMS01 (.pdf)
48V Fan
for DMS-100 NT3X90AC / NTBX63AA Fan Trays
w/ Power Prongs & (4) Threaded Mounting Holes
(screws included)
|
|
|
|
|
DMS-100
# TF-DMS03
(.pdf)
48V Fan for
DMS-100 Tray
w/ TTL Tach & 3 Wire Plug
(use
in Nortel NT3X90AF Fan Trays)
|
|
|
|
|
|
DMS-100
#
TF-DMS-NTRX91 (.pdf)
DMS-100,
48V Replacement Fan
w/ 3 Wire Plug
(use in DMS-100 NTRX91AA / NT0X91AA fan
units
(MVIE and CSDM bays), CLEI: ENMYACM)
|
|
|
|
|
|
OPTI 6100
#
TF-OPTI-01 (.pdf)
12V Fan for Opti 6100 Fan Trays
w/ 3 Wire Plug
(use in EFANM Tray
# 1184508L2)
|
|
|
|
|
MARCONI MESA CABINET "TOP"
#
TF-MCABTZ-01 (.pdf)
48V Heat Exchanger (Tarzan)
for
Marconi Mesa "Top" HX Cabinet
w/ 3 Wire Plug |
|
|
|
MARCONI MESA CABINET "BOTTOM"
#
TF-MESA6-01 (.pdf)
48V Heat Exchanger for
Marconi Mesa "Bottom" HX Cabinet
w/ 3 Wire Plug
|
|
|
|
MARCONI MESA CABINET
#
TF-FA400-01 (.pdf)
48V Fan
for
Marconi Mesa Master Fan Tray
w/ 3 Wire Plug
(use in EBM - LP98638, # FA-400-175-001)
|
|
|
|
MARCONI MESA
CABINET
#
TF-FA400-02 (.pdf)
48V Fan
for
Marconi Mesa Slave Fan Tray
w/
3 Wire Plug
(use in EBM / Papst - # FA-400-175-002)
|
|
|
|
PURCELL FLEXAIR 741 CABINET
#
TF-MC133-01 (.pdf)
(133mm) Heat
Exchanger for
Purcell FlexAir 741 Cabinet (Door)
w/ 4 Leads & Faston Connectors
(fan only - use with existing bracket)
|
|
|
|
|
MESA 768 CABINET
#
TF-MC133-02 (.pdf)
(133mm) Heat
Exchanger for Mesa 768 Cabinet
w/ 3 Pin Plug
(fan only - use with existing bracket)
Installation guide
(.pdf file)
|
|
|
|
|
MESA SPORT CABINET
#
TF-MC133-05 (.pdf)
(133mm)
Heat Exchanger for Mesa Sport Cabinet
w/ 3 Pin Male Bulkhead Plug
(fan only - use with existing bracket)
|
|
|
|
|
CALIX
ODC CABINET DOOR
#
TF-HX175LP-01 (.pdf)
(175mm) "Low Profile" Heat
Exchanger for
Calix
ODC Cabinet Door
w/ Grommet, 4 Leads & Faston Connectors
|
|
|
|
|
|
|
MESA CABINET
#
TF-MC225-01 (.pdf)
(225mm) Heat Exchanger
for
Mesa Cabinet (Top)
w/ Round Weatherproof Connector
(fan only - use with existing bracket)
(fans are accessed through a panel on the
solar shield (top of cabinet))
|
|
|
|
|
CELL SITE
MESA ALARM CONTROLLER
#
TFC-MESA-01 (.pdf)
Mesa Cabinet
Alarm Controller
use in Cabinets: Mesa XL, Mesa SOLE, Span
XL, Mesa Bridge & Mesa Edge
|
|
|
|
|
|
# KIT-209OSP
(.pdf)
T-Berd* 209 OSP Auto Test T1 Repeater Test Kit
● TAG's # EXT-209OSP is a replacement "smart"
repeater adapter for the TTC 41754. The
EXT-209OSP is used with the T-Berd* 209 OSP Test
Set.
* T-Berd is a registered Trademark of JDSU.
|
|
|
|
|
#
FOTC-KIT (.pdf)
Fiber Optic Test Cord Kit
SAVE TIME & MONEY!! Eliminate
repeat dispatches
due to a missing fiber cable!
TAG's Fiber Optic Test Kit
has everything your technician needs for
FTTP, FTTH,
CO, COEI, OSP, I & M testing!
|
|
|
|
|
# EXT-CXM-KIT
(.pdf)
CXM Test Kit
●
The
EXT-CXM-KIT is designed for technicians who test at T1
Line Repeater Housings, such as 818 apparatus cases. |
|
|
|
# EXT-238K3 (.pdf)
T1 Repeater Test Kit
●
The EXT-238K3 Kit is designed for technicians who test
at T1 Line Repeater Housings, such as
818 apparatus cases. |
|
Contact a TAG sales
representative today at:
856-753-8585 |
return to top |